Antiko

Water and oil-repellant for indoor use to produce a satin-finish antique look. Enhancing product that darkens the stone, normally used after the Antike diamond brush system.

Brillux

Silicone wax for marble and granite that gives an excellent polish along with a good water and oil repellency, as well as a color enhancement effect that can be used on any natural stones and all marbles.

Korrector

Korrektor is a unique product used to stain floors to an original color and enhance the longevity of this color, as the color is permanent and the product is easy to apply. Available in the following colors: Black, red, green and brown.

Polish kp85

Water and oil-repellant for indoor use to produce a satin-finish antique look. Enhancing product that darkens the stone, normally used after the Antike diamond brush system.

Kristal Black

Thanks to the thermal force of the under the machine, Kristal Black can uniformly penetrate into the molecular gaps of the floor and then solidify into high-strength, rigid transparent protective layer and form a crystal shield on the surface of the stone. It maintains powerful protection against dust, acid/alkali, washing, scratches and stain, and excellent self-cleaning properties. After the treatment with Kristal Black, stones will present as a higher gloss and more easily maintained surface.
The size of the particles of the Kristal Black are generally within 5nm and are able to penetrate into the micro air pores of tiles and form a uniform film of high gloss. Due to containing titanium and quartz particles, attractive gloss appears and eases the work of cleaning staff.
Incomparable high strength and wear resistance: Kristal Black contains rigid titanium particles, which are over a hundred times harder then resin grains contained in general crystallizing agents that are able to resist foot traffic for an extended period of time and exempt you from the need for repeated polishing.
Resistance to Slip and Stains: After treatment with Kristal Black the surface will be hydrophobic, not only resisting to ink, juice, dirt, but against the oxidation or decomposition by general acid or alkali detergents.

Kristal Blu

Thanks to the thermal force of the under the machine, Kristal Blu can uniformly penetrate into the molecular gaps of the floor and then solidify into high-strength, rigid transparent protective layer and form a crystal shield on the surface of the stone. It maintains powerful protection against dust, acid/alkali, washing, scratches and stain, and excellent self-cleaning properties. After the treatment with Kristal Blu, stones will present as a higher gloss and more easily maintained surface

The size of the particles of the Kristal Blu are generally within 5nm and are able to penetrate into the micro air pores of tiles and form a uniform film of high gloss. Due to containing titanium and quartz particles, attractive gloss appears and eases the work of cleaning staff.

Incomparable high strength and wear resistance: Kristal Blu contains rigid titanium particles, which are over a hundred times harder then resin grains contained in general crystallizing agents that are able to resist foot traffic for an extended period of time and exempt you from the need for repeated polishing.

Resistance to Slip and Stains: After treatment with Kristal Blu the surface will be hydrophobic, not only resisting to ink, juice, dirt, but against the oxidation or decomposition by general acid or alkali detergents.

Kristal Green

Thanks to the thermal force of the under the machine, Kristal Green can uniformly penetrate into the molecular gaps of the floor and then solidify into high-strength, rigid transparent protective layer and form a crystal shield on the surface of the stone. It maintains powerful protection against dust, acid/alkali, washing, scratches and stain, and excellent self-cleaning properties. After the treatment with Kristal Green, stones will present as a higher gloss and more easily maintained surface.
The size of the particles of the Kristal Green are generally within 5nm and are able to penetrate into the micro air pores of tiles and form a uniform film of high gloss. Due to containing titanium and quartz particles, attractive gloss appears and eases the work of cleaning staff.
Incomparable high strength and wear resistance: Kristal Green contains rigid titanium particles, which are over a hundred times harder then resin grains contained in general crystallizing agents that are able to resist foot traffic for an extended period of time and exempt you from the need for repeated polishing.
Resistance to Slip and Stains: After treatment with Kristal Green the surface will be hydrophobic, not only resisting to ink, juice, dirt, but against the oxidation or decomposition by general acid or alkali detergents.

Kristallux

Crystallizing liquid for the polishing of marble, terrazzo, limestone, travertine and other types of stone surfaces

Polish Color

Polish Color is not only one of the best polishing powder but it is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (to be mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and alltype of stone surfaces, whether with honed or rough surface textures.
Instruction to use: Spread a small quantity of POLISH COLOR on the floor and add a little water. Using the Discolux or white disc, make a “yogurt-like” cream and work until the floor becomes lucid. If you need to, add another little bit of POLISH and water. The polishing product must always be like yogurt. At the end of the job, wash the floor thoroughly with the clean white disc. When the floor is dry, polish with a dry white disc.

Polish gres

Polish Gres is not only one of the best polishing powder but it is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (to be mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and alltype of stone surfaces, whether with honed or rough surface textures.

Instruction to use: Spread a small quantity of POLISH GRES on the floor (about 100 gr) and add some water. By using Discolux or a white disc on a normal rotary machine, make a cream like yogurt and work until the gloss comes out. Add some POLISH and water from time to time. At the end of work, carefully wash with water by using a white disc. When the floor is dry, polish with white disc.

Polish KMT

Polish KMT is not only one of the best polishing powder but it is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (to be mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and alltype of stone surfaces, whether with honed or rough surface textures.
Instruction to use: Spread a small quantity of POLISH KMT on the floor and add a little water. Using the Discolux or white disc, make a “yogurt-like” cream and work until the floor becomes lucid. If you need to, add another little bit of POLISH and water. The polishing product must always be like yogurt. At the end of the job, wash the floor thoroughly with the clean white disc. When the floor is dry, polish with a dry white disc.

Polish KP92

Polish KP92 is not only one of the best polishing powder but it is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (to be mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and alltype of stone surfaces, whether with honed or rough surface textures.
Instruction to use: Spread a small quantity of POLISH KP92 on the floor and add a little water. Using the Discolux or white disc, make a “yogurt-like” cream and work until the floor becomes lucid. If you need to, add another little bit of POLISH and water. The polishing product must always be like yogurt. At the end of the job, wash the floor thoroughly with the clean white disc. When the floor is dry, polish with a dry white disc.

Polish KP92 Cream

Polish KP92 Cream is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (already mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and all type of stone surfaces, whether with honed or rough surface textures.
Instruction to use: Spread a small quantity of POLISH KP92 Cream on the floor. Do not add water. Using the Discolux or white disc, make a “yogurt-like” cream and work until the floor becomes lucid. If you need to, add another little bit of POLISH Cream. The polishing product must always be like yogurt. At the end of the job, wash the floor thoroughly with the clean white disc. When the floor is dry, polish with a dry white disc.

Polish Palladiana

Polish Palladiana is not only one of the best polishing powder but it is also an excellent chemical for daily cleaning of hard surfaces. It is fine abrasive (to be mixed with water) to remove fungus, soap scum build-up and embedded stains in grouting immediately. This product is suitable for use in kitchens, restaurants, shopping mall, and alltype of stone surfaces, whether with honed or rough surface textures.
Instruction to use: Spread a small quantity of POLISH PALLADIANA on the floor and add a little water. Using the Discolux or white disc, make a “yogurt-like” cream and work until the floor becomes lucid. If you need to, add another little bit of POLISH and water. The polishing product must always be like yogurt. At the end of the job, wash the floor thoroughly with the clean white disc. When the floor is dry, polish with a dry white disc.

Stone Soap

Stone soap is a unique, high quality, combination cleaner that simultaneously forms a water insoluble and dirt repellant barrier. This barrier facilitates daily maintenance and increases the serviceability of the floor

Stone soap also brightens and conditions the surface while maintaining a neutral mixture that does not contain any solvents, giving it an excellent environmental rating.

Stone soap comes in a concentrated solution that can be used with a scrubbing machine or manual damp mopping cleaning for maintenance purposes. Dilute the product by 0.5 litres every 10 litres of water for daily cleaning, and increase to 1-2 litres per 10 litres for added sealing impregnation effect.

Able to be used on nearly all types of stone, concrete, terrazzo, timber and even vinyl flooring.

Beton Color Dye

Beton Color Dye is a solvent based dye formula produced in 12 different colors that allow a permanent color dye into the concrete flooring that can then be polished to a high gloss finish.

Beton FIller

A concrete grout filling mixture, based on potassium silicate and to be used during the grinding process the product will bond with high strength to the dust produced in the grinding process and simultaneously act to fill the micro cracking and pores of the surface.

Beton Grout

Beton grout and crack repair is a three part curable bonding system that allows for an extremely strong and tough crack filling agent that is able to perfectly match the color of the concrete floor The three part agent is mixed with cement captured during the grinding process in order to match the color of the floor. An extremely fast curing process of 5-8 minutes enables the product to grow above and hence completely fill the void once applied, allowing for perfect anchorage into the filled area and for machining to completely flat and homogenous surface. This product is then able to be polished to a very high finish, making it the best permanent solution for polishers needing to fill large holes and cracks in concrete.

Beton Guard Lithium

Beton guard lithium is a patented, high gloss, stain and wear resistant finish for improving the sheen, hardness and chemical resistance of natural stone, terrazzo and concrete. This water-based, lithium fortified chemical polish dries over 48 hours into a clear, extremely hard micro-coating that tenaciously bonds and reacts with the substrate forming an insoluble bond with the surface.
Non-toxic, non hazardous and VOC compliant, creates an easy to maintain finish that is tough, stain and mark resistant. Used in conjunction with high speed burnishing machinery to create superior clarity and improved resistance against water and oil based stains. Ideal for ground and polished concrete surfaces, will also act to enhance the color intensity.

Beton Hardener

Beton hardener is a high performance industrial concrete floor treatment to densify concrete and hence create a stronger and more durable finish that enables polishing of the concrete floor to a Superconcrete finish. This finish will also be more stain resistant, dust-proof and traffic resistant. Traditional untreated concrete flooring can deteriorate with time as foot-machine traffic breaks down the surface to create a dull, rough and unattractive floor.

Beton Shield Plus

Beton Shield Plus is an idro-oleo treatment for concrete, composed of an emulsion of resins and waxes particularly resistant to weathering. It ‘s a special protection that resists the typical corrosive action of concrete alkalinity. (N.B. before applying BETON SHIELD PLUS, the concrete must be perfectly dry and cured). Don’t treat floors earlier than one month after application, or in freezing weather conditions, or in presence of high humidity.